Eurofort Safety Boots S4

Safe, professional work shoes made of PVC polymer material designed to protect against injuries and accidents.

Steel toecap
Non-slip sole

Available sizes: 37-50
Available colors: black, green, yellow, white

Eurofort safety shoes were created for working in difficult conditions, which particularly expose personnel to injuries. Careful and thoughtful design means that this model can be used in many industries, also at low temperatures.

  • toe protection: steel toe cap provides a high level of impact protection (up to 200J) and compressive strength (up to 1500 daN)
  • non-slip sole resistant to oils, fats and gasoline
  • insulation from the cold from the ground
  • resistance to short-term, occasional contact with solvents.
Care and maintenance
  • Eurofort rubber footwear should not be used in the environment of harmful substances (acids, lyes) which have a negative impact on its condition.
  • Store at 5–25 ° C, at least 1 meter away from heating devices. Protect against sunlight and strong artificial lighting.
  • Using the footwear in an acid, leach or organic solvent environment may shorten its lifetime.
  • Shoes should be cleaned with a cloth or sponge, washing off dirt with clean water and soap.
  • If the lining is damp, the footwear should be dried in a ventilated place, away from radiators and other heating devices.
Parameters:
  • Footwear complies with the requirements of the Regulation of the European Parliament and the Council of the European Union 2016/425 (of March 9, 2016) on personal protective equipment, which requires mandatory CE marking before being allowed to trade.
  • Eurofort shoes with an upper are a personal protective equipment (PPE) class II, requiring CE certification by the notified body RICOTEST N. 0498, Via Tione 9, 37010 Pastrengo VR, Italy and comply with the UNI EN ISO 20345: 2011 standard.
  • The footwear also provides anti-skid protection tested according to the EN ISO 13287: 2007 method (on a ceramic floor with spilled water and a detergent, and on a steel floor with spilled glycerin).
  • The boot with the upper is made of materials that meet the requirements of the UNI EN ISO 20334: 2011 standard in terms of quality and functionality.
  • The sole of the rubber footwear meets the requirements of EN ISO 20345